- Watch each camera's ONVIF VideoSource/MotionAlarm; record while it
reports movement and stop after a 10s post-roll, through a per-stream
MediaMTX path so viewers are never interrupted.
- Clips go to RECORDINGS_DIR (default .data/recordings), one folder per
recorded stream; RECORD_STREAM, RECORD_KEEP_DAYS and MOTION_RECORDING
configure the rest. An hourly sweep deletes clips past retention.
- Add allCameraRecords(): listCameras() calls connection(), which never
resolves outside a request and silently stalled startup. Background
work is no longer awaited in instrumentation either.
- Document the settings in the README.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- First live-video slice closed: both cameras watched live on main and
sub (4 of the goal's 6 checks), leftover-MediaMTX cleanup confirmed.
- Recording decided: motion-triggered clips, no pre-roll, 7-day
retention, stored under .data with an env override, stream by config.
- Motion source decided: ONVIF VideoSource/MotionAlarm; Hikvision's
alert stream refuses the ONVIF login (403).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- POST/DELETE /api/cameras/[id]/live/whep check the session, resolve the
camera from the registry, and relay WebRTC signaling to MediaMTX on
localhost. The browser never sees MediaMTX's address, its error text or
a camera login; video flows browser↔MediaMTX, not through Next.
- LivePlayer negotiates with the browser's own RTCPeerConnection and
shows connecting, reconnecting and failed states with Retry.
- The camera page gains a Live section; the pop-out plays live video and
falls back to snapshot polling if it can't. Both offer Main/Sub.
- Stop a leftover MediaMTX from a server that didn't exit cleanly: record
its pid and, on startup, stop it only if that pid is still our binary
with our config.
- Export vrek log: both cameras watched live on main and sub (4 of the
goal's 6 checks).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- npm run video:install downloads the pinned MediaMTX v1.21.0 for this
platform, verifies its SHA-256 against checksums committed in
src/lib/mediamtx-install.ts, and installs it into gitignored bin/.
- On server start, instrumentation launches MediaMTX with a generated
owner-only config: API and WebRTC signaling on 127.0.0.1, only the ICE
port (UDP 8189) on the LAN, a hashed per-boot API password, no
anonymous users, unused protocols off. Restarts on crash with backoff,
stops with the server; VIDEO_BRIDGE=off skips it.
- Camera streams are added to MediaMTX at runtime, on demand, with the
stored login; nothing with a password is written to disk or echoed.
- rtspSourceWithLogin() reads a profile's RTSP URI over ONVIF.
- Export vrek log (live video goal, decisions, codec finding).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Record that camera …af54 has no full-resolution still over ONVIF or
ISAPI (fnd-dw1pqcw, fnd-k1jyt83); close iss-3vck3js.
- Retire gol-2nxgqjn, and gol-wqf95dq and gol-8v1wqvp as met on one
user observation each.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- "Pop out" on each dashboard card opens /cameras/[id]/live in a named
popup sized to the main stream (a plain link if popups are blocked).
- The live page shows only the frame, never stretched past its own size,
with a fading name/time/refresh-rate overlay and error handling.
- The card pauses its own polling while its pop-out is open; the two
coordinate over a BroadcastChannel.
- Share frame rendering (FrameImage) between card and pop-out.
- Ignore a stray build cache folder; export vrek log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Per-section Edit/Save for image settings and streams (Server Actions),
validated against the camera's own ranges; stream saves ask to confirm
the restart. Results report applied or adjusted values.
- Every write is appended to a local audit log (.data/audit.jsonl).
- In Manual exposure, edit exposure time (with approximate shutter speed)
and gain; the read-only page shows them, and a hint explains that
Brightness mainly works in Auto.
- Pin onvif to the mikemainguy fork for complete imaging/encoder setters;
set turbopack.root automatically when onvif is a linked checkout.
- Export vrek log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Read-only settings and stream URLs (vrek gol-2nxgqjn), shaped by a
read-only probe of the real cameras (findings fnd-*) and decisions
dec-s205dvs and dec-gtw493s.
- src/lib/camera-settings.ts: reads streams, image, time/NTP and
network over ONVIF behind a CameraSettingsSource interface, so an
ISAPI source can be added later. Sections are read independently
and fail on their own with fixed text. RTSP URLs have credentials
stripped and use the registry host. camera.ts exports its cached
connect() and the profile helpers it shares with it (iss-7eaywtf).
- /cameras/[id]: server-rendered page with an access check, 404 for
unknown ids or non-private hosts, and a streamed Suspense section.
Shows streams (with copyable RTSP URLs and an ONVIF-login note),
image, time/NTP with a drift warning, and network, plus Refresh
and back. Copy falls back to execCommand over plain LAN HTTP,
where the clipboard API is unavailable (iss-s935a4n).
- Dashboard card: the name links to the camera page; a main-stream
summary line ("Main 4096×1860 · H.264 · 20 fps"); a manufacturer
of "ONVIF" is hidden (iss-pv2bvzj).
522 tests, 99.9% line coverage. Checked by the user in a browser
against both cameras. Refreshes the vrek export (the icon principle
now covers the page's new icons).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Retires gol-m8je1wc (icons done for now) and records principle
pri-8ev5m89, derived from dec-1vnz5fw. Icons come from lucide-react,
always accompany text, are aria-hidden, use standard Tailwind sizes,
map one concept to one icon, and are tested by lucide-<name> class.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds lucide-react (vrek dec-1vnz5fw, chosen over Heroicons and React
Icons) for the icons goal gol-m8je1wc.
- Camera status badge on each card (iss-scj42jq): Live, Connecting,
Needs login, Not activated, Offline, Session ended. Each is an icon
plus a visible label, derived from existing query state with no
extra device calls. Logic in src/app/camera-status.tsx.
- Action icons (iss-chrdd0v): scan (radar, then spinner), refresh
rate, change or forget login, retry, the camera web page link
(replaces ↗), save, sign in and sign out.
- Warning and error icons (iss-egy082x): unsecured banner, setup
panel, inline errors, session-ended notice, login and setup
headings.
Icons are decorative (aria-hidden), spinners respect reduced motion,
and every accessible name is unchanged (all 403 prior tests pass
untouched). 416 tests, 99.9% line coverage. The vitest threshold
comment now points to principle pri-be2smzk. Refreshes the vrek
export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Completes securing the web front end (vrek gol-wqf95dq, iss-r5vrjx7).
- /login: Server Action with a generic error, same-site-only redirect
back to ?next=, and throttling of failed logins (10 per address and
100 overall per 15 min). The header shows "Signed in as" with
Sign out (iss-nj9wmwp).
- First run with no admin: instrumentation prints a one-time setup
code, shared with the app through globalThis. /setup requires it,
and 5 wrong codes rotate it. "Skip for now" runs unsecured for the
browser session behind a red warning banner on every page
(iss-9nxdndr).
- src/proxy.ts: optimistic redirects to /login or /setup, 401 for
the API, and the 12 h sliding session refresh. requirePageAccess()
and apiAccessDenied() re-check in the page and all 6 route handlers
(iss-76d5wrb).
- An expired session now shows "Your session has ended" instead of
the camera-login form.
- README documents in-app setup, skipping and signing in.
Verified with unit tests (383, 99.9% line coverage), end to end
against `next start`, and manually in a browser by the user.
Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Groundwork for securing the web front end (vrek gol-wqf95dq). The app
does not enforce login yet.
- src/lib/admin-file.ts: the admin file at ADMIN_AUTH_FILE (default
.data/admin.json). scrypt hashing (N=2^16, random salt, bounded
parameters, constant-time compare), zod-validated reads where a
malformed file is an error, and atomic 0600 writes that won't
replace an existing admin without overwrite. Plain Node, so the
CLI can share it (iss-mffqscg).
- src/lib/admin-auth.ts: server-only app layer; failed logins always
cost one hash.
- scripts/create-admin.mts + `npm run admin:create`: create or reset
the admin outside the app, interactive (hidden, confirmed) or piped
(iss-7xmka20). The README documents it, a no-npm Node one-liner,
the file format, and password reset.
- src/lib/session-token.ts and session.ts: stateless HMAC-signed
session cookie, keyed from the password hash so a password change
ends every session, with a 12 h sliding window (iss-e27nb70,
dec-f0xar8r).
281 tests, 99.8% line coverage. Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
next build warned that the env-dependent registry and credential-store
paths made Turbopack trace the whole project (vrek iss-jvxcd1n).
Marking only the readFile calls cleared the warning, but it still
traced .data/cameras.json and the encrypted .data/credentials.json,
which a standalone deployment would copy from the build machine.
A /* turbopackIgnore: true */ on each default path.join(process.cwd(),
".data", ...) fixes both. The traced files for every route now include
nothing from src/, public/ or .data/. The env-var overrides the tests
use still work. Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Route tests for camera info, snapshot and credentials (vrek
iss-nc2tj7c): input validation, store-only-after-verify, reconnects
after login changes, and fixed error messages with no upstream text.
- Providers and layout tests (iss-nc5w0j8).
- Discovery tests for onvif.ts (iss-3bg4r6e): multicast parsing,
unicast sweep batching and subnet limits, de-duplication and
merging. They run on a fake network, replacing onvif Discovery,
node:dgram and node:os, per new vrek principle pri-e14bahk
(replaceable transport; tests never touch the real network).
- coverage.thresholds.lines = 95, so `npm run coverage` fails below
the goal (iss-zjpc22k).
200 tests, 99.77% line coverage. Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds 47 tests for camera.ts (vrek iss-qak2mz8), bringing it to 100%
line coverage. A scripted stand-in for the onvif Cam class drives the
connect outcomes: profiles, warnings, inactive devices, and login
errors. Snapshots run over real HTTP against a local server with real
Digest and Basic 401 challenges. Also covers isAllowedHost edge cases.
Overall line coverage is 72.4% (143 tests). Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
cameraErrorResponse now returns fixed text for each error class and
logs the original server-side. Upstream ONVIF/SOAP responses, socket
errors and credential-file paths no longer reach the browser (vrek
iss-tz5s098). CameraAuthError gains a missingLogin flag so the UI can
still tell "no login saved" apart from "login rejected".
Tests throw errors carrying a fake password and file path, and check
neither appears in any response. Closes the dashboard migration (vrek
iss-qbh3541). Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds src/app/camera-queries.ts: React Query hooks over our own routes,
with each camera's queries keyed ['camera', id]. The camera card,
snapshot polling, login form and network scan use these hooks instead
of hand-rolled fetch/useEffect state (vrek iss-2fm6x2y, iss-ksxmctm,
iss-m032zwq, iss-8hfq2y2).
- Snapshot polling pauses in hidden tabs, never overlaps a slow
frame, and stops after a failure until Retry. Each frame's object
URL is created and revoked in one effect, so none leak under Strict
Mode.
- Saving or forgetting a login resets only that camera's queries.
- New "Forget saved login" action, shown for stored logins.
- Fix: a scan timeout typed below 1 s now clamps to 1 s instead of
falling back to 5 s.
Adds jsdom component tests (test/dom.tsx helpers): 93 tests, line
coverage 54.3%. Refreshes the vrek export.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Commits .vrek/log.ndjson, the vrek export of goals, principles,
decisions, issues and evidence (restore with vrek_import), plus
.mcp.json, which wires the vrek MCP server, and .idea/vcs.xml. The
SQLite database and its -wal/-shm files are local state and are
gitignored; the export is refreshed and committed periodically.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
